Commercial Boiler Maintenance: What and How Often

Most commercial Boilers need 2 to 4 maintenance visits a year, depending on the equipment and how hard it runs. A visit checks combustion, the burner, Igniter and Flame Sensor, venting, the Heat Exchanger, water condition, Pumps and Valves, and the safety Controls.

Serving Sonoma and Napa counties

Two Raypak Boilers with a Pump, copper Piping and a hot-water Storage Tank

What skipped maintenance costs

A Boiler that is out of adjustment burns more fuel, short cycles and wears its parts faster. Most no-heat calls come from parts a maintenance visit would have caught: a dirty Flame Sensor, a weak Igniter, a leaking Pump Seal or a failing Relay.

What a visit covers

Combustion check and burner adjustment. Igniter and Flame Sensor. Venting and air supply. Heat Exchanger condition. Water condition, pressure and leaks. Circulation Pumps, Pump Seals and Valves. Safety Controls such as the low-water cutoff, high limit and Relief Valve.

When to schedule it

For a winery, before harvest, when Boilers warm Tanks and supply hot water for cleaning. For hotels and buildings, before the heating season. Heavily used Boilers get more visits through the year.

Signs a Boiler needs service now

It will not fire or locks out, it cycles on and off often, the pressure relief valve drips, water appears around the Boiler or Pumps, or hot water runs out sooner than it used to.

Keeping hot water during a repair

If a Boiler needs major parts or a replacement, a rental Boiler & Tank Package can supply hot water until the work is done.

Updated November 16, 2026

Request a Service or Quote

We’ll follow up to confirm the details and schedule a visit.

Equipment down or production affected?

After-hours service is for Maintenance & Service Agreement customers. Online requests are reviewed during office hours.

(707) 544-1277

Prefer to write a message or attach a file? Use our contact form.