Chiller Rental: Sizes and Monthly Cost
A winery or plant usually rents a Chiller for one of three reasons: harvest needs more cooling than the main system has, the main Chiller is down for repair, or a replacement is being installed. Below are the units we rent, what each one delivers, and the starting monthly rate. Delivery, hookup and pickup are quoted separately.
Serving Sonoma and Napa counties

| Unit | Capacity | Power | Rate |
|---|---|---|---|
| Air-Cooled Glycol Chiller | 30 nominal tons, 24 tons at 35°F TD, 5 HP Pump and glycol Tank built in | 208-230 V, 3 phase (460 V with Transformer) | From $5,400 per month |
| Portable Glycol Chiller / Heater | 4.3 tons cooling at 35°F TD, 35,800 btuh heating | 208-230 V, 3 phase | From $2,950 per month |
| Portable Glycol Unit Cooler | 4.5 tons at 25°F TD, thermostat and control valve built in | 120 V, 1 phase | From $500 per month |
| Boiler & Tank Package | 500,000 btuh input, 425,000 btuh output, natural gas or propane | 120 V, 1 phase | From $5,500 per month |
How big a rental Chiller do you need?
We size it from your cooling load, temperatures and flow, and confirm it during the quote. For more capacity, several 30-ton rental Chillers can run in parallel. For a few Tanks or a single room, a Chiller / Heater or a Unit Cooler is often enough.
What your site needs
Power that matches the unit, a level spot with access for delivery, and a place to connect to your glycol loop or Tanks. When you request a rental, we review capacity, power, connections and site access with you, then coordinate delivery, hookup and startup.
How the hookup works
We isolate your Chiller if it is still connected, tie the rental into your glycol loop and power, prime the lines and bleed the air, then set and test it before we leave.
Request a Service or Quote
We’ll follow up to confirm the details and schedule a visit.
Equipment down or production affected?
After-hours service is for Maintenance & Service Agreement customers. Online requests are reviewed during office hours.
(707) 544-1277